UBL Basic Install Kit

UBL ElectronicsSKU: UBL-IKIT-01

Sale price$76.93

Description

Easily install most of your lights with the UBL Basic install kits. The kit includes everything you need to safely install your lights, bundle wires, connect to brackets, surge protection, and seal any holes that you may need to make to install your lights. With these tools you can also safely remove trim without damaging clips and the variety of bits in the micro screwdriver set will fit almost any size screw that you may come across with your install!

What's Included:

  • (1) RTV Silicone Sealant 3oz. Tube
  • 500 PC 7" Cable Ties
  • (110) 8 Slot Fuse Panel
  • ATC Fuse Set
    • 7.5A -15pcs
    • 10A-20pcs
    • 15A-20pcs
    • 20A-25pcs
    • 25A-20pcs
    • 30A-10pcs
  • Nylon Trim Tool Remover Set
    • 1 clip plier
    • 2 upholstery fastener remover
    • 2 stainless steel stereo removal tools
    • 3 stainless steel car terminal removal tools
    • Storage Bag
    • Tools are nylon and prevent marring and scratches
  • Screwdriver Set with Carrying Case
    • Phillips: 1.0, 1.5, 2.0, 2.5, 3.5
    • Triangle: 2.0
    • Tri-wing: Y2.0
    • Star: 0.8
    • U-Shaped: U2.6
    • Point: 0.8
    • Hexagon sockets: M2.5, M3.0, M3.5, M4.0, M4.5, M5.0, M5.5
    • Torx: T3, T4, T5, T6, T7, T8, T9, T10, T15, T20
    • Hex: H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5, H4.0
    • Slotted: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0
  • Solder Seal with Heat Shrink Tubing
    • 10 White (24-26 AWG)
    • 22 Red (22-18 AWG)
    • 13 Blue (16-14 AWG)
    • 5 Yellow (12-10 AWG)
    • Solder Melting Temp: 280° - 320° F

You may also like

Recently viewed